Monoacylglycerols derived from butter oil by Penicillium roquefortii in suspension cultures

Structural isomers of monoacylglycerols (monoglycerides, MAGs) were identified and compared after degradation of butter oil by two strains of Penicillium roquefortii and a commercial lipase from P roquefortii (EC 3.1.1.3) at pH 7.0 and 10 °C. The conditions were selected as they were comparable with those used in the manufacture of blue mould‐ripened cheese. The commercial lipase was selected to compare with the fungal strains in terms of acyl migration. Results showed that the main isomers formed by lipolysis with the commercial lipase were sn‐2 MAGs (64 mol%), whilst spores and emerging mycelia of P roquefortii produced mainly sn‐1(3) MAGs (83–90 mol%). The work reported here may lead to further assessment of different MAG structural isomers as natural preservatives in foods and dairy products. © 2002 Society of Chemical Industry     

Potential use of phenolic antioxidants on peanut to control growth and aflatoxin B1 accumulation by Aspergillus flavus and Aspergillus parasiticus

Food‐grade antioxidants: butylated hydroxyanisole (BHA), propyl paraben (PP) and butylated hydroxytoluene (BHT) (10 and 20 mmol g^?1) and all the mixtures of these chemicals were tested for inhibitory activity on the growth of and aflatoxin B₁ (AFB₁) accumulation by Aspergillus parasiticus and A. flavus on irradiated (7 kGy) peanut grains. Also, the influence of these treatments was evaluated in different water conditions (0.982, 0.955, 0.937a_w) at 11 and 35 days of incubation at 28 °C. Water activity (a_w) affected the fungal growth, no fungal development was observed at the highest stress water condition (0.937a_w). Butylated hydroxyanisole at 10 mmol g^?1 level and all the mixtures with PP and/or BHT were significantly effective (P = 0.05) in increasing lag phase and reducing growth rate and colony forming units per gram of peanut of both Aspergillus section Flavi strains and AFB₁ accumulation. The application of BHA at concentrations of 20 mmol g^?1 alone or with PP and/or BHT totally inhibited fungal growth at 11 and 35 days of incubation. The results suggest that the addition of these chemical mixtures on peanut grains at low levels has potential to impact synergically on the control of Aspergillus section Flavi. Copyright © 2007 Society of Chemical Industry     

Microstructures formed by spray freezing of food fats

The spray-freezing of two food fats, tripalmitin (PPP) and cocoa butter (CB) and mixtures thereof, has been modeled experimentally using a novel single droplet freezing apparatus configured so that temperature profiles or samples for microstructure analysis can be obtained. For 2 mm diameter droplets suspended in a cold air flow at temperatures around 2–15°C, initial cooling rates were on the order of 10 K s⁻¹ and the temperature profiles could be correlated directly to DSC data collected at 20 K min⁻¹, indicating that minimal supercooling of the materials occurred in the droplet form. Microstructure analysis confirmed that PPP crystallized preferentially in mixtures, and that the surface structure was very sensitive to storage conditions. The bulk structure was much less sensitive, and the internal microstructure of the PPP droplets revealed distinct nucleation sites, which were absent from the CB: These persisted in the mixtures up to 50 wt%. X-ray analysis indicated that the fats crystallized in their more stable forms, namely, β for PPP and Form V/V1 in CB.     

Measurement of solid fat content by ultrasonic reflectance in model systems and chocolate

A series of confectionery coating fat (CCF) and cocoa butter (CB) dispersions in corn oil were prepared and tempered to a range of temperatures (10, 12 and 15 °C and 26, 27.5 and 29 °C respectively) to produce samples with solid fat contents (SFC) between 0 and 9%. The ultrasonic velocity in the CCF samples increased with increasing SFC and decreased with temperature, however the CB samples were too attenuating to allow velocity measurements. The ultrasonic reflectance at the surface of both sets of dispersions decreased linearly with SFC but at the same level of solids was less for CB than CCF suggesting some dependence on other aspects of fat structure. The microstructures and thermal properties of the fat systems are compared in an attempt to understand these structural differences. Finally ultrasonic reflectance is shown to respond to changes in a chocolate melt during tempering.     

Characterization of edible oils,butters and margarines by Fourier transform infrared spectroscopy with attenuated total reflectance

The combination of attenuated total reflectance (ATR) and mid-infrared spectroscopy (MIRS) with statistical multidimensional techniques made it possible to extract relevant information from MIR spectra of lipid-rich food products. Wavenumber assignments for typical functional groups in fatty acids were made for standard fatty acids: Absorption bands around 1745 cm⁻¹, 2853 cm⁻¹, 2954 cm⁻¹, 3005 cm⁻¹, 966 cm⁻¹, 3450 cm⁻¹ and 1640 cm⁻¹ are due to absorption of the carbonyl group, C−H stretch, =CH double bonds of lipids and O−H of lipids, respectively. In lipid-rich food products, some bands are modified. Water strongly absorbs in the region of 3600–3000 cm⁻¹ and at 1650 cm⁻¹ in butters and margarines, allowing one to rapidly differentiate the foods as function of their water content. Principal component analysis was used to emphasize the differences between spectra and to rapidly classify 27 commercial samples of oils, butters and margarines. As the MIR spectra contain information about carbonyl groups and double bonds, the foods were classified with ATR-MIR, in agreement with their degree of esterification and their degree of unsaturation as determined from gas-liquid chromatography analysis. However, it was difficult to differentiate the studied food products in terms of their average chainlength.     

Milk fat fractionation today: A review

Although anhydrous milk fat (AMF) has excellent properties, its variable physicochemical properties and its lack of functionality restrict its uses in the food industry. A technology involving dry fractionation of AMF has been developed, and its attributes include selectivity, reliability and general application. Combining two simple and reliable technologies,i.e., multi-step fractionation and blending, it is possible to overcome functionality problems and the seasonal variations of AMF. Lecture presented at the joint meeting of the International Society for Fat Research and the American Oil Chemists’ Society in Toronto, May 10, 1992.     

从花生壳中提取天然抗氧化成分的研究

介绍了从花生壳中提取天然抗氧化成分的方法，讨论了溶剂、时间、温度、酸度、固液比等因素对提取效果的影响。结果表明，花生壳的乙醇提取物具有较强的抗氧化性。     

超声波协助提取花生壳中黄色素的实验研究

通过单因素实验,将用紫外分光光度计在355 nm处测定的提取液吸光度作为实验指标,确定超声波提取花生壳中黄色素的最佳条件为:以70%乙醇作提取溶剂、料液比为1 g∶9 mL、超声波频率为20 kHz、每次提取8 min、提取2次,色素粗品收率为4.3%.与加热回流法、浸泡法比较,超声波提取方法具有效率高、时间短、节省能源等优点.